Efflorescence Treatment

• Soluble salts must be present in the concrete & the masonry.
• Moisture must be present to carry that soluble salts to the surface of concrete & masonry. Water may be present in concrete, could be on the surface or in air.
• Hydrostatic pressure or evaporation must cause the solution of salt & water to move to the surface.

Nanofix introducing first of its kind solution EFFLOCURE to stop the problem from your building & increasing the life expectancy of paint to save your hard earned money.

Nanofix Efflocure is a two part Liquid Nano Composite effective solution to Stop the Efflorescence.

Areas of Application: Brick Surface (Masonry Walls), Concrete & Plastered Surface.

Features & Benefits :

• Efflocure offers the Unique Solution through reaction between two Nano Composites .
• Formation of Nano Polymer particles on Plaster/ Brick Surfaces which plugs the pores & thus does not allow moisture penetration inside the structure .
• Easy to Apply. Second coat is applied after complete drying of first coat .
• Replastering / Repainting is recommended within 24 hrs of drying of Second Coat .
• Primer can be applied directly on the coated surface before painting.

NANOFIX Methodology to cure Efflorescence

• Surface should be dry cleaned by removing Loose Salt Scales, Patches by Wire Brush
• Apply Nanofix Efflocure part A by brush on the prepared surface
• After drying of First Coat, apply Part B by Brush
• Treated surface to be dried before Over Coating or plastering.

Note :

• If the plaster, affected by efflorescence, is found unsound then it is required to remove the plaster to expose the brick masonry surface, to apply Nanofix Efflocure in two coats. Plaster can be done after 24 hours of application of Nanofix Efflocure.
• Nanofix Efflocure can be applied directly on the plastered surface, if found sound.
• For concrete surface, damaged portion can be repaired with sand cement mortar using Nanofix 0102 ( 200 gm per kg of cement ) before application of Nanofix Efflocure.

For detail specification & assistance as per your need, please contact our technical division.

Material Handling & Safety Information :

• Nanofix product should be stored in closed container in a cool, dry place away from direct sunlight
• Maintain safety during execution of the waterproofing jobs and due care to be taken while handling Nanofix & other construction materials.
• Nanofix materials are nontoxic. Hands and tools should be washed with normal water.
• NANOFIX recommends the enforcement of stringent health and safety measures at all job sites.